Dust Solutions
Dust Compliance Made Simple
MILWAUKEE® is committed to providing safe and versatile silica dust management solutions that help address the OSHA regulation on respirable crystalline silica dust ( 29 CFR 1926.1153 ). MILWAUKEE® dust management solutions are focused on enhancing productivity. From the most universal dust extraction solutions fitting all major brands to a full range of products for floor-to-ceiling dust management, this is compliance made simple.Universal Cordless Solutions
Floor To Ceiling Dust Management
Drilling
Chipping
Cutting
Surfacing
Accessories
Drilling
Chipping
Cutting
Surfacing
Accessories
- SDS Max Dust Extraction Attachment5317-DE
- OSHA Compliance when used with Milwaukee 8 Gallon Dust Extractor (8960-20)
- Quick and Easy Attachment to Milwaukee Hose Clip Adaptor (49-90-1959)
- Removable Brush Rings for up to 2-3/4" Drilling and Coring Applications
- Rubber Seal Ensures Dust Containment
- Vacuum Assisted Suction Adheres to Even and Uneven Surfaces
- M18 FUEL™ HAMMERVAC™ 1-1/8" Dedicated Dust Extractor2915-DE
- AUTOPULSE™ Filter Cleaning Mechanism cleans the dust extractor filter automatically after use
- OSHA Table 1 Compliant Solution
- Dust Extractor Capacity: 1-1/8" in Diameter, 8" in Depth
- HEPA Filter Included
- Includes Large and Small Dust Nozzles
- Vacuum Port for minimizing exposure during emptying
- Translucent Dust Box
- Pairs with 2915-20 M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer w/ ONE-KEY™
- In-line Design
- M18 FUEL™ HAMMERVAC™ 1" Dedicated Dust Extractor2912-DE
- AUTOPULSE Filter Cleaning Mechanism cleans the dust extractor filter automatically after use
- OSHA Table 1 Compliant Solution
- Dust Extractor Capacity: Up to 1" in diameter and up to 6" in depth
- HEPA Filter Included
- Includes Large and Small Dust Nozzles
- Pairs with 2912-20 and 2914-20 Rotary Hammers
- SDS+ DUST TRAP™ Replacement Sleeve (Bulk 5)48-03-3235
- OSHA Compliance without a Vacuum
- Universal Fit for SDS-Plus Rotary Hammers
- Clear sleeve for maximum visibility and accuracy
- OSHA® Objective Data compliance without a dust extractor
- OSHA® Table 1 compliant with a dust extractor
- Fits SDS Plus drill bits up to 8" overall length and works with stop bits
- Compact, collapsible design ideal for accessibility and storage
- SDS+ Vacuum Bit 7/16" x 7 - 7/8" x 13"SDS-Plus-Vacuum-Bits
- OSHA Table 1 compliant drilling solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153)
- Dust extraction holes remove dust from the hole while drilling
- Up to 2x faster chemical anchor preparation due creating a clean hole while drilling
- 4-cutter carbide tip for long life in concrete and concrete with rebar applications
- Universal adapter fits most common dust extractor vacuums
- Replacement adapter available (48-20-2100)
- Use in SDS-Plus Rotary Hammers in rotary hammer mode
- ANSI specificed to fit common anchors
- SDS MAX Vacuum BitsSDS-MAX-Vacuum-Bits
- OSHA Table 1 compliant drilling solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153)
- Dust extraction holes remove dust from the hole while drilling
- Up to 2x faster chemical anchor preparation due creating a clean hole while drilling
- 4-cutter carbide tip for long life in concrete and concrete with rebar applications
- Universal adapter fits most common dust extractor vacuums
- Replacement adapter available (48-20-2150)
- Use in SDS-Plus Rotary Hammers in rotary hammer mode
- ANSI specificed to fit common anchors
- SDS Max Chisel Boot5318-DE
- The MILWAUKEE® SDS Max Chisel Boot is OSHA Table 1 compliant, is optimized for bull point & flat chisels up to 1 1/8" wide.
- OSHA Table 1 Compliant Solution
- Optimized for bull point and flat chisels up to 1-1/8" wide
- Optimized for Milwaukee SDS Max Rotary Hammers
- Hose Clip Adaptor for easy attachments to Milwaukee 8 Gallon Dust Extractor (8960-20)
- Strap secures hose to rotary hammer
- Cutting Dust Shroud49-40-6110
- Compatible with Milwaukee 8 Gallon Dust Extractor (8960-20)
- Easy Cut Depth Adjustment
- Guide Plate for Consistent Depth of Cut
- Quick and Easy Attachment to Milwaukee Hose Clip Adaptor (49-90-1959)
- 4 in. - 5 in. Surface Grinding Dust Shroud49-40-6101
- OSHA Table 1 Compliant when used with Milwaukee 8 Gallon Dust Extractor (8960-20)
- Quick & Easy Installation: Attach and Go
- High Density Bristles: Provides maximum dust collection and containment
- Clear Front Clip: Allows for clear visibility and control
- Removable Front Clip: For grinding against walls
- 7” Universal Surface Grinding Dust Shroud49-40-6105
- Universal surface grinding dust shroud for 7 in. grinders
- Quick & easy installation: attach, tighten and go
- High density bristles: provide maximum dust collection and containment
- Clear front clip: allows for clear visibility and control
- M12™ HAMMERVAC™ Dust Extractor Nozzle49-90-2301
- Compatible with 2712-DE and 2715-DE models
- HAMMERVAC™ Dedicated Dust Extractor M18™ & M28™ Dust Box49-90-2342
- Replacement Dust box, filter, lid for M18™/M28™ FUEL Dedicated HAMMERVAC™
- OSHA Table 1 Compliant with filter cleaning mechanism
- HEPA Filter
- M18 FUEL™ HAMMERVAC™ Accessory Dust Box, Filter, and Lid49-90-2344
- Compatible with M18 FUEL™ HAMMERVAC™ Dust Extractors (2912-DE & 2915-DE)
- Helps with OSHA Silica Dust Compliance
- Translucent box to see dust levels
- Captures 99.97% of all particles greater than 0.3 microns
- Accessory Dust Box49-90-2140
- Translucent Dust Box
- Holds Round HEPA Filter - Replacement filters available (49-90-0910)
- Vacuum Port Connection
- Replaceable
- For use with M18 FUEL™ 5/8" SDS Plus Rotary Hammer (2908-20 & 2908-22DE)
- Accessory Dust Box49-90-0905
- Translucent Dust Box
- Holds Round HEPA Filter
- Vacuum Port Connection
- Replaceable
- For use with 3311-20 SDS Plus Overhead Rotary Hammer
- HEPA Filter (3pk)49-90-0910
- Filter Replacements
- HEPA Filter
- 99.97% Filter Efficiency
- 3 pack
- M18 FUEL™ Overhead Rotary Hammer w/ Integrated Dust Extraction (3311-22)
Milwaukee Dedicated Solutions
Loading Results
© 2026 by Milwaukee Tool. All rights reserved.